Light the underside of your car and see it glow as it goes!
Plugs into our Lighting Kit or can be wired directly to a 12v power source. If you have a 24v vehicle with lights then the power going to the lights is most likely 12v already. You can check it with a volt meter and tap into those wires. Or you can easily use our Voltage Reduction Module to reduce any 18, 20, or 24v power source down to 12v. May require additional wire length added depending on your setup.
Kit comes with TWO 35" long strips that you can simply tape under the sides of any ride-on vehicle. Can be cut shorter in 3 LED increments.
Waterproof LED's, flexible strip, low power consumption.
Easy Installation Instructions:
Getting Started
Our comprehensive guides assist in steering clear of the pitfalls of upgrading your vehicle.
Learn MoreOur Podcast
Join us as we discuss all things power wheels!
