Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Escalade & PW Gravedigger >

Stage I DIY Motors for Escalade
Stage I DIY Motors for Escalade


 
: $85.00
: $68.00
Savings: $17.00

Product Code: STAGE-I-DIY-ESCALADE-17T


Installation Aids:

Lubrication Options


Heat Sink Option



Qty:  
Description
 
This is the Stage I Performance Motors kit for all Powerwheels Escalades. Will also work on older Power Wheels brand Grave Diggers. Not for the 24v Monster Jam Grave Digger. The Stage I kit is a great way to add more speed without breaking the bank. Kit includes:

- 2 Modified Performance 550 motors - The fastest 550 motors designed for ride-ons today. Easily bolt right into your gearboxes with 2 screws.
- Lightweight metal pinion gears
- Gear ratio modified for even more speed
- Torque sleeves on both motors.
- Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!
- Bendable motor wire tabs so as not to break as easy as stock ones.

Motors are warrantied for up to 12 volts of SLA batteries and are often used with 18 volts (not warrantied). It is HIGHLY RECOMMENDED to add the 550 Cooling Fan Kit if you do run 18 volts. Still helpful for 12 volt vehicles too. If you're running lithium batteries you will need to use the Soft Start Low Voltage Lithium Module. We strongly recommend using our Metal First Gears when running 18 volts or more.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage I in 12v Mustang
Stage I Arctic Cat at 18 Volts
How and Why to Break-in Motors
How to Properly Apply Grease

Recommended Accessories
.437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash Four Point Safety Harness Cap Nut Tool
: $1.60

Add
: $10.00

Add
: $19.99

Add
: $1.00

Add
.437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash Four Point Safety Harness Cap Nut Tool
Axle Thrust Bearing Brake Reduction Module 550 Cooling Fan Kit
: $1.70

Add
: $11.00

Add
: $28.00

Add
Axle Thrust Bearing Brake Reduction Module 550 Cooling Fan Kit

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great Power Wheels Upgrade September 20, 2019
Reviewer: Keith Kubosh from Elgin, TX United States  
I have upgraded our power wheels mustang and peg perego gator with MLS stage 1 gear boxes and motors, they are much better and faster than what the oem puts in them. The tech support was always very prompt and helpful. I highly recommend MLS to anyone looking to hop up your kids ride on toys!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 7, 2018
Reviewer: Daniel Bell from Decatur, IL United States  
Everything fit and works great. Broke it in according to directions and the buggy is running like a champ.  Thanks to ML Toys I  was able to save some cash and revamp an old power wheel that was given to us that had a broken gear box. It now is faster than any power wheel on the block.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Stage 1 motors gearbox June 28, 2016
Reviewer: Matt Ritchey from Maryville, TN United States  
Easy to install. These things are surprisingly fast.

Was this review helpful to you?