Name: 550 Cooling Fan Kit
Brand: vendor-unknown
SKU: 550-Cooling-Fan-Kit
Price: 28.0 USD
Availability:  InStock

1 2

550 Cooling Fan Kit

Product code: 550-Cooling-Fan-Kit

$28.00

$28.00 ~~$0.00~~

Shipping calculated at checkout.

This kit will allow you to lower the temperatures of your 550 motors by running large cooling fans over large heatsinks that draw heat away from the core of your motors. The kit is very easy to install and does not require an additional battery pack. Keep the torque sleeves on the motors with this kit too! Will run on 12 to 24 volts and reduces car run times by about 2 minutes. No soldering or cutting wires required. Works on all brands of ride-ons.

Please view the Before You Buy & Installation Instructions before purchasing.

How to Install 550 Cooling Fan Kit

If you have made any non-MLToys modifications to your car please reach out to our tech support first to check compatibility. Just like when modifying a real car, modifying a Power Wheels voids all warranties.

MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Warranty and Returns

Shipping Terms

5 stars: 9 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Not sexy, but essential

Sometimes it's the things you don't see that are the most important. These cool 24v motors a lot! Before the cooling kit, the motors would get so hot within 30-60 min of use, that you couldn't touch them. Now they just get warm, even after 2 hrs of running. Granted still fairly warm, but significantly cooler. As an electrical engineer, that will go a long way to ensure they keep going.

Product worked as it should mounted in easily

Product worked as it should mounted in easily and is running fine

550 motors cooling fan kit with heat sinks

Works well! Motors don't get hot anymore just "warm to the touch". Make sure to use a meter to verify correct polarity when wiring, otherwise you'll damage the power unit.

Must Have for Motors

Fans are perfect for the motors. Easy to install. I have them wired to run when the pedal is pushed. Make sure on the splice connectors you squeeze the metal until it is flush with the plastic.

Fan it

Works good, easy set up.

24v f-150 new stock motors

So with your dual 750 motors pinions and metal first gear grease and brake reduction is plenty fast and works great in low speed. I know it voids the warranty but I'm very satisfied with all the products. The cooling fans were not needed on your product as they do not overheat at all with the heat sinks. But I was able to utilize the fans on a F-150 with 24 volts and it did the trick on stock motors to keep them from overheating too much.

Easy to install

Easy install on the bronco upgrade. Hoping it will extend the motor life.

Fan-tastic

This is a super easy upgrade for your 550 motors. It give me peace of mind knowing the motors won't over heat. We live in the desert and summer days are hot. This keeps my sons truck cool all summer day.