Stage V Super Speed Motors/Gearboxes for Dune Racer & Baja Extreme - ML Toys Store
Upgrades by Vehicle
  • View All Vehicles

  • Stock Parts
  • View All Stock Parts

  • Sale

    Stage V Super Speed Motors/Gearboxes for Dune Racer & Baja Extreme

    Product code: Stage-V-Super-Speed-Dune-Racer

    The Stage V kit is specifically designed for Dune Racers, Baja Extremes, Trailsters, and Stingers running 24 volts and looking for maximum top speed and less wheel spin. We've swapped the 72 tooth first gear for a 66 tooth Hardened Steel one running on Ball Bearings and the pinion gear is 22 tooth Hardened Steel making this the lowest gear ratio (highest top speed) available in any ride-on. Our Performance 775 motors provide insane amounts of torque for off-road and handle up to 24 volt loads without a care. The thicker-then-molasses stock grease has been replaced with our Teflon Race Grease designed to coat the gears and shafts to make them more slippery and create less heat buildup. The gearbox housings and remaining gears are our Phoenix Performance Gearboxes designed for maximum durability. This setup is for die-hard speed addicts only. These gearboxes should only be used on-road or light gravel. No passengers or added weight. Installation is simply removing your old gearboxes and putting your Stage V in its place. Kit includes:

    - 2 massive 775 size Modified Motors with Internal Cooling Fans pre-installed in gearboxes.
    - Torque sleeves on both motors.
    - Spade Connectors for easy wire installation.
    - 2 Hardened 22 Tooth Steel Pinion Gears with Lifetime Warranty*.
    - 2 Hardened 66 Tooth Steel First Gears with Lifetime Warranty*.
    - 4 Steel Ball Bearings.
    - Modified Final Gear Ratio for even more top speed.
    - MLToys Teflon Race Grease for even more speed, motor durability, and more run time.
    - 2 MLToys Phoenix Gearboxes including stronger nylon gears, improved lubricating, stronger housings, and low friction race grease.
    - Fully assembled! Just swap out with your stock motor/gearboxes and follow the break-in instructions!
    - Written and video instructions.

    Motors are safe for up to 24 volts. We strongly recommend using Steel First Gears when running 18 volts or more. Not for use with lithium batteries unless you use our Soft Start Low Voltage Lithium Module.

    Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

    Installation Videos are in the Product Pictures.

    Show Us Your Ride #mltoys

    Customer Reviews

    Based on 15 reviews
    Stage V Super Speed Motors/Gearboxes for Dune Rac

    OAKDALE, PA United States

    Motors were easy to install and work great with the 24 volt upgrade.

    Eric Kooienga
    Happy and disappointed

    It was great, the assemblies went right in and we’re working fantastic. After about the 4th ride one of the assemblies started skipping. Took them apart and found the 2 screws that hold the motors to the gear box had come loose the motor was so loose it was no longer making contact. The Gear on the motor is grooved pretty bad hopefully it will be ok long term. Motor on the other side was also loose, after pulling out the screws there was no thread lock or lock washers to prevent the motors from coming loose. The money that is being charged for these products I find it unacceptable that I had to disassemble and fix an oversight.

    Larry Seelnacht

    MLT hit the ball out of the park with these! A couple months running now and no issues and so fast! Kids love it on their Dune Racer.

    Cory Groux
    Stage 5 gears

    The gears keep getting shredded in one gear box and in the other one either the pinion gear or 66 tooth gear it keep binding and stripping so no it doesn’t work

    Zac Huffman
    Good product, poor execution

    Upon receiving my gearbox’s, I did a once over to check to make sure everything seemed good. The outside of the boxes wer