- Home
- Adventure Force 24v Thunder Tank
- Dual Motor Temperature Gauge In-Dash
Dual Motor Temperature Gauge In-Dash
Product code: Temperature-Gauge
Know when to say when with this temperature gauge designed to read both of your motors' temperatures at the same time/
Works with 12, 18, or 24 volt vehicles. 24 volt vehicles will require our Voltage Reduction Module (If you already have a VRM for our light kit you can tap into that).
Installs in minutes. Simply cut a hole in the dash where you want to place the gauge using the provided template. Connect the 2 wires to the battery leads that run behind your dashboard. Then tape or rubberband the temperature sensors to the motors. That's it! How cool is that?
Max temperature for our 550's and 775's is 180 degrees Fahrenheit. If using a different brand check with your manufacturer.
Gauge is 1 1/8" high x 1 7/8" long.
Please view the Before You Buy & Installation Instructions before purchasing.
How to Install Temp and Volt Gauges
If you have made any non-MLToys modifications to your car please reach out to our tech support first to check compatibility. Just like when modifying a real car, modifying a Power Wheels voids all warranties.
MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Works great to monitor motor temperature. Easy installation.
We put an order in and we were ordering the wrong parts for what we needed and he ended up catching it and emailing me right away and gave me his number to text him so we got the right parts would definitely recommend them.
Easy to install,great way to monitor temp.
Awesome service and Product
- 5 stars: 24 (62%)
- 4 stars: 9 (23%)
- 3 stars: 5 (13%)
- 2 stars: 1 (3%)
- 1 star: 0 (0%)
Works great to monitor motor temperature. Easy installation.
We put an order in and we were ordering the wrong parts for what we needed and he ended up catching it and emailing me right away and gave me his number to text him so we got the right parts would definitely recommend them.
Easy to install,great way to monitor temp.
Awesome service and Product
recived
Quality product and simple to install
The other half is burnouts, but not the motors. I put large batteries in my 24v conversion, so it's nice to know if I'm getting to the point where it needs a break. We run it 1.5 miles around the neighborhood regularly and temps stay at or below 100. Granted, I'm sure that may go up a bit in the summer when it's not 50 degrees.
Product was very nice
Gauges were easy to install and look great. Not sure on accuracy but they seem close. Will test with thermal gun
I'm teaching my kiddos to use this gauge as a "gas gauge"
When it gets to this temperature it needs to rest and cool down.
Reads temperature really good but cables are really short they won’t reach in off you have to cut them and add more I order to reach the from as a dash an motor other that that is pretty good
Dual Motor Temperature Gauge In-Dash
Have not installed yet
Dual Motor Temperature Gauge In-Dash
Dual Motor Temperature Gauge In-Dash
Another really cool accessory I haven’t had time to put in
Great price for what it is. But how hard is it for the company that builds power wheels for a living to engineer the length of the wires to be the proper length? Dodge dually and the wire is like a foot. Tell me what power wheel is small enough to put a gauge in the dash and run the wires properly to the motors? Cause I haven’t seen one. You’ll need to splice into these to make them work or mount your gauge is some unrealistic spot that makes the gauge useless to the user.
The wires for the temp probes are about a foot too short to make it to a dash mounted position. (Barbie Cadillac PwrWhl)
I wish I could keep it running long enough to see the temperature go up. havent gotten that much reliability yet.
Dual Motor Temperature Gauge In-Dash
Worked fine
overall for the price its okay. its a little frustrating that the power cables were only 4" long and the sensors cables were to short to reach the motors on a Mustang. I would of rather paid another dollar or two and have longer wires than jack around with a bunch of wire splices to make it work.
The product was easy to install. You just need basis tools (electric drill, electric tape, scissors).
Wire was a little short and temp was in c°. both a easy fix
Dual Motor Temperature Gauge In-Dash
Works as it should, adds more bling to the car.
Dual Motor Temperature Gauge In-Dash
The only reason I put down a 4 and not a 5 is because there was a slight hiccup with my order and the gauge wasn’t in the box along with my battery. I let them know and I got an immediate response/apology and they shipped one out that day. Customer service is spectacular and I am now a loyal customer. Can’t say enough good things, great job guys. Thank you
Works as described, only wish temp was in Fahrenheit not celicus
Dual Motor Temperature Gauge In-Dash
These were purchased with the stage IV torque motors and gearboxes to avoid any overheating. I used solid 22G wire wrapped around the motor with the cylindrical thermometers places in a groove on the motor jacket and then twisted off the wire to keep them in place. They’ve worked very well on the three occasions we’ve used them.
Cables were too short, had to splice in 12 inches of addition wire per cable. I hope this doesn't affect the accuracy but you gotta do what you gotta do to make it work.
Getting Started
Our comprehensive guides assist in steering clear of the pitfalls of upgrading your vehicle.
Learn MoreWatch Our Videos
From installation instructions to product explanations, kids going fast and more. Check out the YouTube Channel!