Home > Electrical >

Dual Motor Temperature Gauge In-Dash
Dual Motor Temperature Gauge In-Dash


 
Alternative Views:


: $15.00
: $10.00
Savings: $5.00


Product Code: TEMPERATURE-GAUGE
Qty:

Description
 
Know when to say when with this temperature gauge designed to read both of your motors' temperatures at the same time/

Works with 12, 18, or 24 volt vehicles. 24 volt vehicles will require our Voltage Reduction Module (If you already have a VRM for our light kit you can tap into that).

Installs in minutes. Simply cut a hole in the dash where you want to place the gauge using the provided template. Connect the 2 wires to the battery leads that run behind your dashboard. Then tape or rubberband the temperature sensors to the motors. That's it! How cool is that?

Gauges read in Celcius. Max temperature for our 550's and 775's is 76 degrees. If using a different brand check with your manufacturer.

Gauge is 1 1/8" high x 1 7/8" long.
Temp Gauge Installation

Recommended Accessories
Voltage Reducer for LED Lights on 18v or 24v Vehicles
: $13.00

Add
MLToys Voltage Reduction Module

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 31 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Knowing is half the battle November 26, 2023
Reviewer: Anonymous Person from Pea Ridge, AR United States  
The other half is burnouts, but not the motors.  I put large batteries in my 24v conversion, so it's nice to know if I'm getting to the point where it needs a break.  We run it 1.5 miles around the neighborhood regularly and temps stay at or below 100. Granted, I'm sure that may go up a bit in the summer when it's not 50 degrees.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Temp gauge September 28, 2023
Reviewer: Mike Fisher from Jefferson City, MO United States  
Product was very nice

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 They seem great August 4, 2023
Reviewer: Ben Bellamy from Wasilla, AK United States  
Gauges were easy to install and look great. Not sure on accuracy but they seem close. Will test with thermal gun

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Learning curve. July 13, 2023
Reviewer: Chris from New Richmond, OH United States  
I'm teaching my kiddos to use this gauge as a "gas gauge"
When it gets to this temperature it needs to rest and cool down.

Was this review helpful to you?

  1 of 2 people found the following review helpful:
 
3 of 5 Pretty good but needs more cable October 28, 2022
Reviewer: Rodolfo Moreno from Logan, UT United States  
Reads temperature really good but cables are really short they won’t reach in off you have to cut them and add more I order to reach the from as a dash an motor other that that is pretty good

Was this review helpful to you?

View All Customer Reviews