Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Arctic Cat Tuned Kits >

Stage III DIY Motors for Arctic Cat
Stage III DIY Motors for Arctic Cat


 
: $115.00
: $98.00
Savings: $17.00

Product Code: STAGE-III-DIY-ARCTIC-CAT


Heatsinks?:


Installation Aids:

Lubrication Options



Qty:  
Description
 
This is the Stage III Motors kit for all Power Wheels Arctic Cats. Also fits older Wranglers with 14" tires and Power Wheels brand Grave Diggers. The Stage III kit is specifically designed for vehicles running at 18 or 24 volts where these motors are significantly faster then the original motors. This setup is for die-hard speed addicts only. Kit includes:
- 2 massive 775 size Modified motors with internal cooling fans
- Hardened Steel Pinion Gears attached to motors
- Torque sleeves on both motor for even more low end powers
- Quick change wire connectors with no soldering installation
- Aluminum Vented Motor Mounts to keep the motors from twisting on the gearcases.
- 4mm motor mounting screws

Motors are safe for up to 24 volts. Their potential is not seen unless you are running at least 18 volts. We strongly recommend using Metal First Gears when running 18 volts or more.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
How and Why to Break-in Motors
How to Properly Apply Grease
How to Install Staged Motor Gearboxes

Recommended Accessories
.437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash Four Point Safety Harness Axle Thrust Bearing
: $1.50

Add
: $10.00

Add
: $19.99

Add
: $1.60

Add
.437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash Four Point Safety Harness Axle Thrust Bearing
Cap Nut Tool Brake Reduction Module 24 Volt Conversion for 12 Volt Power Wheels w/ charger
: $1.00

Add
: $11.00

Add
: $152.00

Add
Cap Nut Tool Brake Reduction Module 24 Volt Conversion for 12 Volt Power Wheels w/ charger

Share your knowledge of this product. Be the first to write a review »