Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Dune Racer, Baja Extreme, Trailster & Stinger Tuned Kits >

Stage II DIY Motors/Gears for Dune Racer & Baja Extreme
Stage II DIY Motors/Gears for Dune Racer & Baja Extreme


 
: $155.00
: $138.00
Savings: $17.00

Product Code: STAGE-II-DIY-DUNE-RACER


Installation Aids:

Heat Sink Option



Qty:  
Description
 
This is the Stage II Motor/Gear kit for all Powerwheels for Dune Racer & Baja Extreme, Trailster, & Stingers. It has the fastest 550 motors combined with the most durable gears. Easy to install... we've never had a customer that couldn't complete it! Kit includes:
- 2 Modified motors. The fastest 550's made for ride-ons anywhere.
- Motors have Internal Cooling Fans
- Torque sleeves on both motors for more low end power.
- Quick change motor connectors. Makes motors/gearboxes easy to take in and out of vehicle.
- Bendable motor wire tabs so as not to break as easy as stock ones.
- Hardened Steel First Gears running on 2 ball bearings each.
- Hardened Steel Pinion Gears.
- Race Grease for even more top speed.
- Written and Video Installation and Break-in Instructions.

Motors are warrantied for up to 12 volts of SLA batteries and are often used with 18 volts (not warrantied). It is HIGHLY RECOMMENDED to add the 550 Cooling Fan Kit if you do run 18 volts. Still helpful for 12 volt vehicles too. If you're running lithium batteries you will need to use the Soft Start Low Voltage Lithium Module. We strongly recommend using our Metal First Gears when running 18 volts or more.

Required for assembly: Phillips and Standard Screwdriver, wire cutters/strippers, 120-150 grit sand paper, power drill, cookies.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage II at 18 volts
How to Install Staged Motor Gearboxes
How and Why to Break-in Motors

Recommended Accessories
Four Point Safety Harness Dual Motor Temperature Gauge In-Dash Axle Thrust Bearing 550 Cooling Fan Kit
: $19.99

Add
: $10.00

Add
: $1.70

Add
: $28.00

Add
Four Point Safety Harness Dual Motor Temperature Gauge In-Dash Axle Thrust Bearing 550 Cooling Fan Kit
Brake Reduction Module
: $11.00

Add
Brake Reduction Module

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
3 of 5 Stage ll speed motor May 2, 2021
Reviewer: James Croft from Bishopville, SC United States  
Two out of four are still working and one quit the 1st day and other quit the 2nd day

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Upgraded motors and gearboxes September 29, 2020
Reviewer: Kevin w from Portland, OR United States  
I received the stage 2 speed and motors today.. I was a little concerned USPS had taken little care of the box it was smashed on all sides. Contents appeared to be undamaged. Installed in dune racer everything works great. Now just trying to keep my grandson in low speed for the breakin.. Thank you ML for great product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Continuous buyer April 5, 2020
Reviewer: Joe Herriford from Prairie City, IL United States  
I've bought several items over the past few months very happy with the outcome

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Solid Performers November 12, 2019
Reviewer: Sheridan Lewis from Atlanta, GA United States  
We built a very heavy Halloween vehicle and these motors never missed a beat!  They never got hot and the vehicle drove all night on just one of the two batteries installed.

Was this review helpful to you?