- Home
- Adventure Force 24v Thunder Tank
- Volt / Fuel Gauge In-Dash
Volt / Fuel Gauge In-Dash
Product code: Fuel-Gauge-1
Add a volt meter / fuel gauge to your ride on with style!
Works with 6, 12, 18, or 24 volt vehicles.
Installs in minutes. Simply cut a hole in the dash where you want to place the gauge using the provided template. Connect the 2 wires to the battery leads that run behind your dashboard. That's it! How cool is that?
Gauge is 1 1/8" high x 1 7/8" long. Includes 7 1/2" wire leads.
Please view the Before You Buy & Installation Instructions before purchasing.
How to Install Temp and Volt Gauges
If you have made any non-MLToys modifications to your car please reach out to our tech support first to check compatibility. Just like when modifying a real car, modifying a Power Wheels voids all warranties.
MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Got 6 of them. Put one in a 12v viper. No issues so far. Put 2 in a 24v grave digger. First one lasted seconds before going up in smoke. Confirmed correct wiring using existing bdi harness. Removed the gauge, ran all new 14g wiring direct to battery connector, installed 2nd gauge, worked great for about 10mins max and went up in smoke. Good concept. Nice color options, easy install. Great when it worked.
Easy to install, etc.
Easy to install works as it should.
Works well, and makes it easy to see when the batteries are getting low
Volt / Fuel Gauge In-Dash
- 5 stars: 71 (80%)
- 4 stars: 11 (12%)
- 3 stars: 7 (8%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Got 6 of them. Put one in a 12v viper. No issues so far. Put 2 in a 24v grave digger. First one lasted seconds before going up in smoke. Confirmed correct wiring using existing bdi harness. Removed the gauge, ran all new 14g wiring direct to battery connector, installed 2nd gauge, worked great for about 10mins max and went up in smoke. Good concept. Nice color options, easy install. Great when it worked.
Easy to install, etc.
Easy to install works as it should.
Works well, and makes it easy to see when the batteries are getting low
Volt / Fuel Gauge In-Dash
This helps a lot when deciding if I should charge the battery.
Only watchout is, the instructions aren't great. I wired this in series with a key/switch and soldered it into the positive voltage wire. So there is some cutting/splicing/soldering that needs to be done.
Easy install and keeps you informed on battery status
My vehicle has a spot in the center console so the install was a direct swap. its pretty straight forward and works. Not much to say here.
I love this volt meter as a dad it really makes it easy to see how much draw we have on the battery. I did burn up one before I placed a 3A fuse on the positive.
Purchased a pair of these for my actual vehicles. They are great.
Just wish it was a bit bigger as it almost perfectly replaces oem battery guage.
Volt / Fuel Gauge In-Dash
Haven't installed yet
Volt / Fuel Gauge In-Dash
Volt / Fuel Gauge In-Dash
Haven’t made time to put it in, But is a really Cool accessory.
Arrived quickly-easy to install. Great to have this company out there!
This wasn't my favorite upgrade, but the product is fine and basically works as described even if it's not super useful in practicality.
Volt / Fuel Gauge In-Dash
Volt / Fuel Gauge In-Dash
Very easy to install and again need a little bigger gage wired
Fast shipping, exactly what I ordered
Good instructions
Looked like the wires would just break right off the board in the back so I put a dab of hot glue on them to hold it in place and it seems to be holding up fine.
Great addition to Grandbabys jeep, great product,easy install,fast shipping,I look forward to buying additional parts!
Volt / Fuel Gauge In-Dash
Volt / Fuel Gauge In-Dash
I bought the green and blue volt gauge. Looks great works and quick installation
Works as intended. Quality product. Quality service. Nothing but positive experiences with these guys! I would definitely shop here again!
The product was easy to install. You just need basis tools (electric drill, electric tape, scissors).
Volt / Fuel Gauge In-Dash
Excellent product as usual
Installed this on the dash of a Mustang Power Wheels so I could keep an eye on the battery level at a glance. Works great! Easy to install.
Volt / Fuel Gauge In-Dash
Will this work with a 20 V drill battery?
Getting Started
Our comprehensive guides assist in steering clear of the pitfalls of upgrading your vehicle.
Learn MoreWatch Our Videos
From installation instructions to product explanations, kids going fast and more. Check out the YouTube Channel!