Home > Motors & Gearings > Motor / Gearing Tuned Systems > Kid Trax Tuned Kits >

*Due August if you Order Now* Stage IV Kid Trax Motors w/ Steel First Gears
*Due August if you Order Now* Stage IV Kid Trax Motors w/ Steel First Gears


 
Our Price: $160.00
Sale Price: $135.00
Savings: $25.00

Product Code: STAGE-IV-KID-TRAX


Heatsinks?:


Qty:  

  
Description
 
This is a matched pair of 775 High Performance motors and Hardened Steel First Gears for Kid Trax Dodge Ram Pickups, Chargers, and Land Rover Defenders. Also for Kid Trax Firetrucks that use a 19 tooth pinion on the motors. Just unbolt your old motor and bolt in the new one. Slide out your plastic first gear and slide on the steel one. These motors will add significant speed over stock motors and are designed to run at 18 to 24 volts of power. With each pair you get:
* Torque Sleeves around each motor to add more low-end power.
* Spade Connectors pre-soldered to the motors so you can install without soldering.
* Hardened Steel pinion gears installed on the motors with threadlock.
* Spade Connectors for easy wire attachment
* Hardened Steel First Gears with steel ball bearings
* Motor Mounting Screws are included

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage IV Kid Trax
Stage IV 24 volts
How to Install Kid Trax Motors and Gears
How and Why to Break-in Motors

Recommended Accessories
Axle Thrust Bearing Dual Motor Temperature Gauge In-Dash Four Point Safety Harness Brake Reduction Module
Our Price: $1.60
Sale Price: $10.00
Our Price: $19.99
Our Price: $11.00
Axle Thrust Bearing Dual Motor Temperature Gauge In-Dash Four Point Safety Harness Brake Reduction Module

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 12 Write a review »

  0 of 0 people found the following review helpful:
 
3 of 5 Basic June 22, 2020
Reviewer: Mike from ELMHURST, IL United States  
Motors are nothing  special, you can buy them at the hobby shop, metal gear was $5 on ebay, and then after all this - Gears were shredded after 10 minutes of play. Not worth the money unless you find a way to include better plastic, or more steel gears.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good upgrade June 15, 2020
Reviewer: Patrick Malacarne from Belleville, IL United States  
Worked out fine and I ended up leaving the metal plate on the side of the transmission that they recommend removing. Did this because I didn’t like the way the drive gear barely engaged with the metal first gear with the metal plate in there it was getting full contact all I had to do was drill holes in the Metal plate to allow motor to mount up. On 24 V it did have enough power to break the plastic second gear in the transmission but my boy was doing very sharp turns in tall grass. Overall very happy with the purchase

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product! April 25, 2020
Reviewer: Steve S from IL United States  
Motors and gears came on time. I had questions about the motors after installing them and the email response time was reasonably quick. Very powerful motors! Replaced the standard motors from my sons kid trax ram 3500 dually that burnt up when I changed from 12v-36v. Be warned, if you upgrade similar to what I did, buy a motor speed control or pedal to go along with it. His truck went from top speed of 5 mph to around 15 mph. It was awesome while it lasted, but due to the strong motors and steel first gear, the plastic gears after the metal gears were stripped after starting and stopping about a dozen times. To be clear, this was my fault since it is recommended to have a brake assist or a speed control when upgrading to avoid this exact situation. In conclusion, 5 stars and would recommend this to anyone wanting more out of their kids’ ride-on toys, just be sure to spend the little extra to get the necessary parts to keep your ride-ons rolling. Thanks ML Toys!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 November 29, 2019
Reviewer: Kyle Greenup from White House, TN United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 23, 2019
Reviewer: Terry Robertson from Pierceton , IN United States  
Great service. Speedy delivery. Would highly recommend

Was this review helpful to you?

View All Customer Reviews