Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Ford F-150 & Raptor Tuned Kits >

Stage III Motors & Gearboxes for F-150
Stage III Motors & Gearboxes for Power Wheels F150


 
Alternative Views:


: $200.00
: $175.00
Savings: $25.00

Product Code: STAGE-III-PHOENIX-F150


Heatsinks?:


Qty:  
Description
 
This is the Stage III Motor kit for all Powerwheels F150's, F150 Extremes, and Raptors with Two Seats. The Stage III kit is specifically designed for vehicles running at 18 or 24 volts where these motors are significantly faster then the original motors. This setup is for die-hard speed addicts only. Kit includes:
- 2 massive 775 size Modified motors with internal cooling fans
- Hardened Steel Pinion Gears attached to motors
- Torque sleeves on both motor for even more low end powers
- Quick change wire connectors with no soldering installation
- Aluminum Vented Motor Mounts to keep the motors from twisting on the gearcases.
- 4mm motor mounting screws
- 2 MLToys Phoenix Gearboxes including stronger nylon gears, improved lubricating, stronger housings, and low friction race grease.
- Fully assembled! Just swap out with your stock motor/gearboxes and follow the break-in instructions!

Motors are safe for up to 24 volts. Their potential is not seen unless you are running at least 18 volts. We strongly recommend using Metal First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Phoenix Performance Gearboxes
How and Why to Break-in Motors
How to Install Staged Motor Gearboxes

Recommended Accessories
Brake Reduction Module Cap Nut Tool .437" Reusable Wheel Collar Four Point Safety Harness
: $11.00

Add
: $1.00

Add
: $1.50

Add
: $19.99

Add
Brake Reduction Module Cap Nut Tool .437" Reusable Wheel Collar Four Point Safety Harness
24 Volt Conversion for 12 Volt Power Wheels w/ charger Dual Motor Temperature Gauge In-Dash Axle Thrust Bearing
: $152.00

Add
: $10.00

Add
: $1.60

Add
24 Volt Conversion for 12 Volt Power Wheels w/ charger Dual Motor Temperature Gauge In-Dash Axle Thrust Bearing

Average Rating: Average Rating: 3.5 of 5 3.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
2 of 5 Lots of issues September 15, 2022
Reviewer: Nicholas McWain from Olathe, KS United States  
I’ve had several issues that I am still working through with these motors. First off, one of the wire tabs broke off of the motor within a few days of installing so I had to purchase a new motor. Then the 1st gear stripped on both gearboxes and 2nd gear broke on one of them so I replaced with the steel 1st gear. After getting the new gears installed, the pinion gear in one of the motors got stripped. It appears that the 1st gear post was not set correctly causing the pinion gear and first gear to not be matched up perfectly. Awaiting a response from ML Toys to see what we can do to correct the issue.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product! July 11, 2022
Reviewer: Samuel Tolman from Fayetteville, AR United States  
Extremely easy to install. Just beware that the pre-attached wires are SHORT. I had cut mine for a previous motor so I had to make them longer. Not a big deal.

Motors are excellent and so are the gearboxes. The instructions are informative. I actually realized that my axle was bent only by thinking to check it due to the instructions. My product would have failed without this step.

Was this review helpful to you?