Home > Motors & Gearings > Motor / Gearing Tuned Systems > Mustang Tuned Kits >

Stage V Super Speed Motors/Gearboxes for Mustangs
Stage V Super Speed Motors/Gearboxes for Mustangs


 
Our Price: $280.00
Sale Price: $255.00
Savings: $25.00

Product Code: STAGE-V-MUSTANG-SUPER-SPEED


Heatsinks?:


Qty:  
Description
 
The Stage V kit is specifically designed for Power wheels Mustangs running running 24 volts and looking for maximum top speed and less wheel spin. We've swapped the 72 tooth first gear for a 66 tooth Hardened Steel one running on Ball Bearings and the pinion gear is 22 tooth Hardened Steel making this the lowest gear ratio (highest top speed) available in any ride-on. Our Performance 775 motors provide insane amounts of torque for off-road and handle 24 volt loads without a care. The thicker-then-molasses stock grease has been replaced with our Teflon Race Grease designed to coat the gears and shafts to make them more slippery and create less heat buildup. The gearbox housings and remaining gears are the newest, most durable design that Mattel has designed. This setup is for die-hard speed addicts only. These gearboxes should only be used on-road or light gravel. No passengers or added weight. Installation is simply removing your old gearboxes and putting your Stage IV in its place. Kit includes:

- 2 massive 775 size Modified Motors with Internal Cooling Fans pre-installed in gearboxes.
- Torque sleeves on both motors.
- Spade Connectors for easy wire installation.
- 2 Hardened 22 Tooth Steel Pinion Gears with Lifetime Warranty*.
- 2 Hardened 66 Tooth Steel First Gears with Lifetime Warranty*.
- 4 Steel Ball Bearings.
- Modified Final Gear Ratio for even more top speed.
- MLToys Teflon Race Grease for even more speed, motor durability, and more run time.
- Gearboxes and nylon gears are the newest 7R high strength design*.
- One cap nut for re-assembly (if required on your vehicle model).
- Written and video instructions.

Motors are safe for up to 24 volts. We strongly recommend using Steel First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
How to Install Staged Motor Gearboxes
How and Why to Break-in Motors

Recommended Accessories
Brake Reduction Module Cap Nut Tool 24 Volt Conversion for 12 Volt Power Wheels w/ charger Four Point Safety Harness
Our Price: $11.00
Our Price: $1.00
Sale Price: $129.99
Our Price: $19.99
Brake Reduction Module Cap Nut Tool 24 Volt Conversion for 12 Volt Power Wheels w/ charger Four Point Safety Harness
Dual Motor Temperature Gauge In-Dash
Sale Price: $10.00
Dual Motor Temperature Gauge In-Dash

Share your knowledge of this product. Be the first to write a review »