Home > Motors & Gearings > Motor / Gearing Tuned Systems > Corvette, Porsche GT3, & McQueen Tuned Kits >

*Due August if you Order Now* Stage V Super Speed Motors/Gearboxes for Corvette, Porsche & McQueen
*Due August if you Order Now* Stage V Super Speed Motors/Gearboxes for Corvette, Porsche & McQueen


 
Our Price: $280.00
Sale Price: $255.00
Savings: $25.00

Product Code: STAGE-V-CORVETTE-SUPER-SPEED


Heatsinks?:


Qty:  
Description
 
The Stage V kit is specifically designed for the new C7 Corvette, Porsche GT3, and 2-gearbox McQueen running at 18 or 24 volts. The Massive 775 motors provide insane amounts of torque for off-road and handle 24 volt loads without a care. The weakest link in the gearbox, the 72 Tooth First Gear, has been replaced with our 66 Tooth Hardened Steel First Gear spinning on 2 ball bearings for maximum efficiency. The stock pinion has been replaced with a 22 Tooth Hardened Steel Pinion. Our new gear ratio makes a significant speed gain over the Stage IV kits AND reduces wheel spin! The thicker-then-molasses stock grease has been replaced with our Teflon Race Grease designed to coat the gears and shafts to make them more slippery and create less heat buildup. The gearbox housings and remaining gears are the newest, most durable design that Mattel has designed. This setup is for die-hard speed addicts only. Installation is simply removing your old gearboxes and putting your Stage IV in its place. Kit includes:

- 2 massive 775 size Modified Motors with Internal Cooling Fans pre-installed in gearboxes.
- Torque sleeves on both motors.
- Spade Connectors for easy wire installation.
- 2 Hardened 22 Tooth Steel Pinion Gears with Lifetime Warranty*.
- 2 Hardened 66 Tooth Steel First Gears with Lifetime Warranty*.
- 4 Steel Ball Bearings.
- Modified Final Gear Ratio for even more top speed.
- MLToys Teflon Race Grease for even more speed, motor durability, and more run time.
- Gearboxes and nylon gears are the newest 7R high strength design*.
- One cap nut for re-assembly (if required on your vehicle model).
- Written and video instructions.

Motors are safe for up to 24 volts. We strongly recommend using Steel First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
How to Install Staged Motor Gearboxes
How and Why to Break-in Motors

Recommended Accessories
24 Volt Conversion for 12 Volt Power Wheels w/ charger Brake Reduction Module Dual Motor Temperature Gauge In-Dash Cap Nut Tool
Sale Price: $129.99
Our Price: $11.00
Sale Price: $10.00
Our Price: $1.00
24 Volt Conversion for 12 Volt Power Wheels w/ charger Brake Reduction Module Dual Motor Temperature Gauge In-Dash Cap Nut Tool
Four Point Safety Harness
Our Price: $19.99
Four Point Safety Harness

Average Rating: Average Rating: 3 of 5 3 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent gears ⚙️ very satisfied. June 2, 2020
Reviewer: Sergiu Creciun from Windermere, FL United States  
Purchased  a stage 5 speed gears ⚙️ With 775 motors  and installed them just plug and play, the speed was I would say more than I needed... it goes around 14 Mph way too fast than I expected))) but to make it safer for my kids i have to buy and install a ECM 24V kit with adjustable Knobs for variable speed and start time .

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 Eh.. May 26, 2020
Reviewer: Anthony Pleau from lewiston, ME United States  
Installation was very easy. Break in period was done. Motors lasted about 2 hours and burned out, even after installing cooling. Quite a bummer for the price.

Was this review helpful to you?