Home > Motor & Gearing Upgrades > Motor / Gearing Tuned Systems > Escalade, PW Gravedigger, 14" Wrangler Tuned Kits >

Stage IV Speed Motors/Gearboxes for Escalade
Stage IV Speed Motors/Gearboxes for Escalade


 
Our Price: $275.00
Sale Price: $245.00
Savings: $30.00

Product Code: STAGE-IV-ESCALADE
Qty:

Description
 
This is the Stage IV Motor/Gearbox kit for Cadillac Escalades, older Jeep Wranglers using 14" tires, and Power Wheels brand Grave Diggers. Not for the 24v Monster Jam Grave Digger. The Stage IV kit is specifically designed for vehicles running at 18 or 24 volts The Massive 775 motors provide insane amounts of torque for off-road and handle 24 volt loads without a care. The weakest link in the gearbox, the First Gear, has been replaced with a hardened steel first gear which also has 2 ball bearings for maximum efficiency. The thicker-then-molasses stock grease has been replaced with our Teflon Race Grease designed to coat the gears and shafts to make them more slippery and create less heat buildup. The gearbox housings and remaining gears are the newest, most durable design that Mattel has designed. This setup is for die-hard speed addicts only. Installation is simply removing your old gearboxes and putting your Stage IV in its place. Kit includes:

- 2 massive 775 size Modified Motors with Internal Cooling Fans pre-installed in gearboxes.
- Torque sleeves on both motors.
- Quick Change Bullet Connectors for easy install and removal of gearboxes.
- 2 Hardened Steel Pinion Gears with Lifetime Warranty*.
- 2 Hardened Steel First Gears with Lifetime Warranty*.
- 4 Steel Ball Bearings.
- Modified Final Gear Ratio for even more top speed.
- MLToys Teflon Race Grease for even more speed, motor durability, and more run time.
- Gearboxes and nylon gears are the newest 7R high strength design*.
- One cap nut for re-assembly (if required on your vehicle model).

Motors are safe for up to 24 volts. We strongly recommend using Steel First Gears when running 18 volts or more.

* For warranty details on gears and gearbox housings please see our Warranty page. Just like when modifying a real car, modifying a Power Wheels voids all warranties. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage IV Escalade Kit at 24 volts

Recommended Accessories
.437" Reusable Wheel Collar Axle Thrust Bearing Brake Reduction Module Dual Motor Temperature Gauge In-Dash
Our Price: $1.50
Our Price: $1.50
Our Price: $10.00
Sale Price: $10.00
.437" Reusable Wheel Collar Axle Thrust Bearing Brake Reduction Module Dual Motor Temperature Gauge In-Dash
24 Volt Conversion for 12 Volt Power Wheels w/ charger
Sale Price: $126.99
24 Volt Conversion for 12 Volt Power Wheels w/ charger

Average Rating: 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
August 2, 2018
Reviewer: Peter Santucci from EAST DUNDEE, IL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
The ultimate upgrade. June 15, 2018
Reviewer: Frank from Waterloo, ON Canada  
Glad at last to have something that can handle all the extra voltage I am pushing through the escalade. These guys really know their stuff.  I did not have the special crimp tool so I used pliers and a bit of solder :).  

Can't wait to see the little one do more donuts and drifts with the once sluggish escalade.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
December 16, 2017
Reviewer: Eric S from FLORHAM PARK, NJ United States  
Super fast.  My kids loved it.  I had to buy the right tool to complete the crimp but once I had it installation was fairly easy.  Don't forget to take any traction off your wheels before you let the kids on it.  I learned the hard way with blown fuses and stripped gears

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Pulling trucks August 13, 2016
Reviewer: Kerry from Brandenburg, KY United States  
These boxes and motors were amazing... Held up to several runs (still work after) while pulling a sled with 500+ lbs. Thank you all so much for the wonderful product that helped my baby get his dream "pulling truck".

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
For the serious powerwheels addict. July 25, 2016
Reviewer: Derby Dad from WI United States  
I received the package on time with no hassle. The gears and motors are holding up great. Thanks

Was this review helpful to you?