Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Ford F-150 & Raptor Tuned Kits >

Stage III Speed Motors for F150
Stage III Speed Motors for F150


 
Our Price: $105.00
Sale Price: $90.00
Savings: $15.00

Product Code: STAGE-III-F150


Heatsinks?:

Lubrication Options



Qty:  
Description
 
This is the Stage III Motor kit for all Powerwheels F150's and Raptors with Two Seats. The Stage III kit is a great way to add more A LOT off-road torque and speed. Recommended for hardcore off-road hill-climbing trail-riding fun and for 18-24 volt vehicles. Kit includes:

- 2 massive 775 size Modified motors with internal cooling fans
- Hardened Steel Pinion Gears attached to motors
- Torque sleeves on both motor for even more low end powers
- Quick change wire connectors with no soldering installation
- Aluminum Vented Motor Mounts to keep the motors from twisting on the gearcases.
- 4mm motor mounting screws

Motors are safe for up to 24 volts. Their potential is not seen unless you are running at least 18 volts. We strongly recommend using Metal First Gears when running 18 volts or more.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
How and Why to Break-in Motors
How to Properly Apply Grease

Recommended Accessories
24 Volt Conversion for 12 Volt Power Wheels w/ charger Four Point Safety Harness Brake Reduction Module Dual Motor Temperature Gauge In-Dash
Sale Price: $135.00
Our Price: $19.99
Our Price: $11.00
Sale Price: $10.00
24 Volt Conversion for 12 Volt Power Wheels w/ charger Four Point Safety Harness Brake Reduction Module Dual Motor Temperature Gauge In-Dash
Axle Thrust Bearing
Our Price: $1.60
Axle Thrust Bearing

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
2 of 5 Must have metal first gear June 5, 2020
Reviewer: Justin Williams from Goose Creek, SC United States  
2 star because of the option to buy inadequate set-up.  The nylon first gear will not last with the 775 motors.  Don't waste time and money.  Buy the metal first gear.  
The tabs on the motors are very delicate and at some point they will break off unless you remove as much stress and vibration as possible.  The wires must be supported but provide some travel.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome May 31, 2019
Reviewer: William Bain from Chester, VA United States  
Great  increase speed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Survey December 5, 2018
Reviewer: Tony Alanis from Las Vegas, NV United States  
Motors and Gearbox were as described. Easy to install.

Was this review helpful to you?