Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Quad Tuned Kits >

Stage III DIY Motors for Power Wheels Quads
Stage III DIY Motors for Power Wheels Quads


 
Our Price: $105.00
Sale Price: $67.00
Savings: $38.00

Product Code: STAGE-III-DIY-QUAD


Heatsinks?:


Installation Aids:

Lubrication Options



Pinion Gear Teeth*:


Qty:  
Description
 
This is the Stage III Motor kit for all Power Wheels Quads using 7R gearboxes. They will not fit in vehicles using 3A or 3B gearboxes.. The Stage III kit is specifically designed for vehicles running at 18 or 24 volts where these motors are significantly faster then the original motors. This setup is for die-hard speed addicts only. Kit includes:
- 2 massive 775 size Modified motors with internal cooling fans
- Hardened Steel Pinion Gears attached to motors
- Torque sleeves on both motor for even more low end powers
- Quick change wire connectors with no soldering installation
- Aluminum Vented Motor Mounts to keep the motors from twisting on the gearcases.
- 4mm motor mounting screws

Please pick a pinion gear size to match the size attached to your stock motor. (Stock pinions are not re-usable)

Motors are safe for up to 24 volts. Their potential is not seen unless you are running at least 18 volts. We strongly recommend using Metal First Gears when running 18 volts or more.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
How and Why to Break-in Motors
How to Properly Apply Grease

Recommended Accessories
Dual Motor Temperature Gauge In-Dash 24 Volt Conversion for 12 Volt Power Wheels w/ charger Axle Thrust Bearing Brake Reduction Module
Sale Price: $10.00

Add
Sale Price: $152.00

Add
Our Price: $1.60

Add
Our Price: $11.00

Add
Dual Motor Temperature Gauge In-Dash 24 Volt Conversion for 12 Volt Power Wheels w/ charger Axle Thrust Bearing Brake Reduction Module
.437" Reusable Wheel Collar
Our Price: $1.50

Add
.437" Reusable Wheel Collar

Average Rating: Average Rating: 3.5 of 5 3.5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Pure Power! September 30, 2021
Reviewer: Michael W. from STROUDSBURG, PA United States  
Delivery was fast, but not nearly as fast as these new motors!!!  Trust the instructions for motor break in process, you won't be disappointed!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good product May 21, 2020
Reviewer: Josh Vandenberg from Neenah, WI United States  
If I had to be critical I would only say that the 775 motors eat up batteries.  I have 3 new 12v batteries wired to make 24v and 36ah in my sons hot wheels quad.  Run it on low most of the time because high is incredible fast.  If they get 20 minutes of ride time it’s unusual.  Charge nightly.  But it’s a great product if I could get batteries situation settled then I would say a perfect product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2 of 5 upgraded motors September 11, 2017
Reviewer: nathan birdsong from New caney , TX United States  
Motors are fast  gear box stripped out the gears in maybe 10 min  guess I need to call and order the metal gears

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 confused September 5, 2016
Reviewer: Randol Lorino from Pleasant Valley, MO United States  
spends more time working on it than he rides left rear tire locked up makes all kinds of noises,when it does run it fly's but does not last long

Was this review helpful to you?