Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Escalade & PW Gravedigger >

Stage III DIY Motors for Escalade
Stage III DIY Motors for Escalade


 
: $115.00
: $98.00
Savings: $17.00

Product Code: STAGE-III-DIY-ESCALADE


Heatsinks?:


Installation Aids:

Lubrication Options



Qty:  
Description
 
This is the Stage III Motor kit for all Powerwheels Cadillac Escalades. The Stage III kit is specifically designed for vehicles running at 18 or 24 volts. These motors provide 4x more off-road torque then stock motors and won't burn up even at 24v. Kit includes:
- 2 massive 775 size Modified motors with internal cooling fans
- Hardened Steel Pinion Gears attached to motors
- Modified Gear Ratio for even more top speed
- Torque sleeves on both motor for even more low end powers
- Quick change wire connectors with no soldering installation
- Aluminum Vented Motor Mounts to keep the motors from twisting on the gearcases.
- 4mm motor mounting screws

Motors are safe for up to 24 volts. Their potential is not seen unless you are running at least 18 volts. We strongly recommend using Metal First Gears when running 18 volts or more. Not for use with lithium batteries unless you use our Soft Start Low Voltage Lithium Module.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
How and Why to Break-in Motors
How to Properly Apply Grease

Recommended Accessories
Axle Thrust Bearing Dual Motor Temperature Gauge In-Dash 24 Volt Conversion for 12 Volt Power Wheels w/ charger .437" Reusable Wheel Collar
: $1.70

Add
: $10.00

Add
: $152.00

Add
: $1.60

Add
Axle Thrust Bearing Dual Motor Temperature Gauge In-Dash 24 Volt Conversion for 12 Volt Power Wheels w/ charger .437" Reusable Wheel Collar
Brake Reduction Module Four Point Safety Harness Cap Nut Tool
: $11.00

Add
: $19.99

Add
: $1.00

Add
Brake Reduction Module Four Point Safety Harness Cap Nut Tool

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 CS August 3, 2016
Reviewer: Scott Rinehart from Palm Beach Gardens, FL United States  
Customer Service at ML toys is second to none.  They answer at all hours and very quick.  Thanks ML Toys!

Was this review helpful to you?