Home > Motors & Gearings > Motor / Gearing Tuned Systems > Mustang Tuned Kits >

*Due Mid July if you Order Now* Stage II Speed Motors/Gearboxes for Mustangs
*Due Mid July if you Order Now* Stage II Speed Motors/Gearboxes for Mustangs


 
Our Price: $205.00
Sale Price: $170.00
Savings: $35.00

Product Code: STAGE-II-MUSTANG


Installation Aids:

Heat Sink Option



Qty:  
Description
 
This is the Stage II Performance Motor/Gearbox kit for all new Power Wheels Mustangs. The Stage II kit includes Lightened Hardened Steel First Gears with Ball Bearings for added gearbox durability. Heat Sinks are added to our Performance 550 motors to help handle additional heat loads created by 18 volts use. These gearboxes have been built using our Race Grease to reduce friction and motor temps. At 18 volts this kits has a higher top end then the Stage III or IV kits but not as much off-road power or long term durability. Kit includes:

- 2 Modified 550 motors pre-installed in gearboxes.
* Torque sleeves on both motors.
* Spade Connectors for quick wire installation. Makes motors/gearboxes easy to take in and out of vehicle.
- Heat sinks added to both motors for cooler temps and longer run times.
- Hardened Steel First Gears running on 2 ball bearings each.
- Hardened Steel Pinion Gears.
- Race Grease for even more top speed.
- Gearboxes are the newest 7R high strength design.
- Cap nut to re-assemble vehicle (if required on your model).
- Installation and Break-in Instructions.

Motors are safe for up to 18 volts. We strongly recommend using Metal First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
How to Install Staged Motor Gearboxes
How and Why to Break-in Motors

Recommended Accessories
Dual Motor Temperature Gauge In-Dash Brake Reduction Module Axle Thrust Bearing 18 Volt Conversion for 12 Volt Power Wheels w/ charger
Sale Price: $10.00
Our Price: $11.00
Our Price: $1.60
Sale Price: $110.99
Dual Motor Temperature Gauge In-Dash Brake Reduction Module Axle Thrust Bearing 18 Volt Conversion for 12 Volt Power Wheels w/ charger
.437" Reusable Wheel Collar Four Point Safety Harness Cap Nut Tool
Our Price: $1.50
Our Price: $19.99
Our Price: $1.00
.437" Reusable Wheel Collar Four Point Safety Harness Cap Nut Tool

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great Purchase December 22, 2019
Reviewer: Richard Mudge from Wilmington, NC United States  
Easy to install, great instructions and my kids love being the fastest in the neighborhood.

Was this review helpful to you?