Home > Upgrades by Vehicle > F-150, F-150 Raptor, F-150 Extreme
This section is for All Powerwheels F-150's that started life as 2 passenger and 12 volts. The F-150 line-up of trucks are great for off-roading because of their aggressive tires. This also makes them bumpy on pavement which there is no avoiding. But they take modifications really well and are incredibly durable. Popular for competition racing and demolition derbies. Here's some recommended combinations from our techs and past happy customers:

1. Stage I F-150 Kit - So your kid blew a motor or gear and you want to spend just a little more to get a little more out of the car. The Stage I Kit is exactly that. You'll get a 10-15% speed gain and have all new motors and gears to start with. If your stock battery is worn it may pop the breaker, so be prepared to replace it if needed with our longer run time 12v that has a higher amp fuse. This kit is also capable of 18 volts if you find you need more speed later.

2. Stage II F-150 Kit and 18v Battery Conversion - This combination will give you about 60% more speed and more run time, plus the durability of hardened steel first gears. This is a very economical way to add a lot of speed and keep the durability. Some folks start with just the 18v Conversion Kit, use that til the motors die, then do the Stage II upgrade.

3. Stage IV or V F-150 Kit and 24v Battery Conversion - Max it out! More then double the speed of your car with this plug n play combo. This is the most popular set-up for F-150's. The Torque version is specifically for pulling, towing, thick grass, steep hills, demolition derbies, and other uses where low-end power is more important then speed.

We recommend a Brake Reduction Module with any speed upgrade unless you have hills to contend with.

Light it up! These cars look HOT with lighting added and it's not hard. Use your imagination selecting colors and placement! Go to the Lighting Kits section to see more options!
Sort By:
Page of 1
Volt / Fuel Gauge In-Dash Volt / Fuel Gauge In-Dash

Add a volt meter / fuel gauge to your ride on with style!

Works with 6, 12, 18, or 24 volt vehicles.

Installs in minutes. Simply cut a hole in the dash where you want to place the gauge using the provided template. Connect the 2 wires to the battery leads that run behind your dashboard. That's it! How cool is that?

Gauge is 1 1/8" high x 1 7/8" long. Includes 7 1/2" wire leads.

Our Price: $9.00
Brake Reduction Module Brake Reduction Module

Every time your kid lets off the throttle the car slams to a halt, bashing their head into the windshield and putting unnecessary strain on the gears. That's because of an electrical braking built into each Power Wheels. And as you increase voltage the effect gets stronger. Bad!

This simple addition will greatly reduce the braking affect by simply adding it in-line to your existing wiring! Works with any voltage vehicle using a plunger-style foot pedal switch.

Installation:
1. Access the 3 wires under the gas pedal.
2. Identify the wire coming from your foot plunger connector in the same position as we've pictured (outside wire closest to the middle connector).
3. Cut about 3" from this wire in a place where you have room to install the Brake Reduction Module.
3. Crimp the Break Reduction Module to the wire. It is not directional.
4. If you want to screw it to the car you can. A little bounce won't hurt it.
5. Re-assemble car.

THIS WILL INCREASE THE STOPPING DISTANCE OF YOUR VEHICLE. DRIVE RESPONSIBLY!

Our Price: $10.00
Dual Motor Temperature Gauge In-Dash Dual Motor Temperature Gauge In-Dash

Know when to say when with this temperature gauge designed to read both of your motors' temperatures at the same time/

Works with 12, 18, or 24 volt vehicles. 24 volt vehicles will require our Voltage Reduction Module (If you already have a VRM for our light kit you can tap into that).

Installs in minutes. Simply cut a hole in the dash where you want to place the gauge using the provided template. Connect the 2 wires to the battery leads that run behind your dashboard. Then tape or rubberband the temperature sensors to the motors. That's it! How cool is that?

Gauges read in Celcius. Max temperature for our 550's and 775's is 76 degrees. If using a different brand check with your manufacturer.

Gauge is 1 1/8" high x 1 7/8" long.

Our Price: $15.00
Sale Price: $10.00
Savings: $5.00
Ford Raptor Grill Marker Lights Ford Raptor Grill Marker Lights

Turn your Ford F-150 into a Raptor with the realistic looking set of 3 Amber LED grill lights. These lights has a smaller diameter then our regular Amber LED's to fit your grill better. Add them into our Basic Lighting Kit or wire each of them directly to a 12v battery source.

Headlights and foglights shown in picture are not included. This is just the 3 grill lights.

Our Price: $10.00
Key Start for Ride-Ons Key Start for Ride-Ons

Bring another level of fun and realism to your ride-on. And get an extra level of control over the use of your kid's car. The car will not start without the key inserted and turned.

Installation is simple. Drill a hole to fit the key housing within 12 inches of where the battery lead passes. Most cars can put them to the right of the steering wheel and tap into the wires under the dashboard. Insert the key housing and tighten the nut. With the battery unplugged, cut either the positive or negative battery lead... either one. Not both. Strip 1/4" of insulation from the ends of the wires. Insert into the housing key wires and crimp. Color doesn't matter.

Key start works with 12v, 18v, or 24v systems. Never turn the key while depressing the gas pedal as it is bad for the housing and for controlling the car.

Kit comes with everything you need including 2 keys, 12" of heavy gauge wire, and crimp connectors.

Our Price: $11.00
Four Point Safety Harness Four Point Safety Harness

Teach your child the good habits of using a safety belt with our 4 point harness specifically designed for ride-on cars. The 4 point attachment gives the look of a race car and is easy enough for your child to operate on their own unlike carseat belts. The wide polyester straps are resistant to UV wear and resist stretching from water exposure. One clip easy on and off. Very simple installation with a Dremel tool or other cutting device to slot the seat in 10 minutes. Follow the video installation instructions linked on this page.

This harness does not replace safe driving techniques and common sense. Be sure to properly adjust your harness' straps as shown in the installation video. Driver and parent assume full liability for any injuries sustained while operating their ride-on car.

Kit includes one 4 Point Harness for one person and mounting hardware. Seat not included.

List Price: $25.00
Our Price: $19.99
Savings: $5.01
Ride-On LED Lighting Kit for 12v, 18v, or 24v models Ride-On LED Lighting Kit for 12v, 18v, or 24v models

You don't need to be an electrician to add lighting to a ride-on car anymore! Our universal lighting installs with some simple hole drilling and attaching wires as indicated in the simple instructions. No soldering or electrical calculations required. Wire as many LED lights as you want into this system as your heart desires. Our LED lights are BRIGHT and will not reduce your run time. See the examples shown on the MLToys website and then send us your pics once your kit is installed! With hundreds of these kits in use today don't let your kid be the only one left in the dark!

Kit includes:
- 2 White 23mm LED's pre-wired for headlights or foglights*
- 2 Red 23mm LED's pre-wired for taillights*
(If you want colors other then red and white put a note in the order comments and we'll gladly switch them out with our other options).
- 1 On/Off switch for the dashboard or center console
- 2 Power Distribution Blocks that accommodate as many lights as you add with no soldering.
- 2 Splice connectors to tap into your vehicle's power without cutting the main wires!
- 6 feet of extra wire (in addition to 3 feet on each LED already).
- Complete easy wiring diagram and instructions.
- MLToys Customer Support if you need help.
* You can add on as many of our additional LED's, underglow LED's, and Knight Rider LED's as you'd like. They are sold separately on the Mltoys website. Light 'em up!

If you're running your vehicle at 18 or 24 volts be sure to add on our Voltage Reduction Module so you don't blow LED's. Instructions included in the lighting kit. Again, no soldering required.

Requires:
- Drill with bits up to 3/8"
- Utility knife or Dremel Tool
- Wire cutters/strippers
- Electrical tape
- Common Sense
- Phillips Head Screw Driver

Our Price: $40.00
Sale Price: $32.50
Savings: $7.50
12 Volt Extended Run Time Battery w/ Black Power Wheels 12v Connector 12 Volt Extended Run Time Battery w/ Black Power Wheels 12v Connector

Our 12 volt battery has 12 amps of running time, compared to 9.5 amps of a stock Power Wheels battery. That means over 30% more run time! Battery also includes a fuse holder with 40 amp fuse and standard 12v Power Wheels female plug. Uses your stock 12v Power Wheels charger (just add 30% to your charging time).

This battery is NOT the same dimensions as your stock battery. However, it will fit into all current vehicles that currently use a grey 12 volt or 2 red 6 volts. Some models will required the white battery strap to be unscrewed.

Length: 5.95"
Width: 3.96"
Height 3.74"

Includes a 1 year warranty against defects from MLToys.

Batteries can not be sent 3rd, 2nd or Next Day Air for hazmat purposes. Orders placed as such will be switched to Priority Mail.

Our Price: $49.99
Stage I Speed Motors/Gearboxes for F-150 Stage I Speed Motors/Gearboxes for F-150

This is the Stage I Motor/Gearbox kit for all Powerwheels Ford F150's and Raptors that are two-seaters. The Stage I kit is a great way to add more torque and speed to an F150 without breaking the bank. It is also the most power you can add without increasing the voltage. Kit includes:

- 2 Modified motors with more speed and torque pre-installed in gearboxes.
- Torque sleeves added to both motors, increasing off-road power.
- Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!
- Steel pinion gears.
- Modified Gear Ratio for even more speed
- Gearboxes are the newest 7R high strength design.

Motors are safe for up to 18 volts but it is HIGHLY RECOMMENDED to add the Heat Sinks option if you do run 18 volts. Still helpful for 12 volt vehicles too. We strongly recommend using Metal First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Our Price: $125.00
Sale Price: $110.00
Savings: $15.00
18 Volt Conversion for 12 Volt Power Wheels w/ charger 18 Volt Conversion for 12 Volt Power Wheels w/ charger

This kit converts any 12v grey battery Power Wheels to 18 volts and allows you to go back to 12 volts whenever you want. It also increases run time 33% over the stock battery. Includes an 18 volt charger that will recharge the batteries in 7 hours. Indicator light to let you know when batteries are charged. Perfectly designed to work with our Stage II motor/gearbox kits.

Kit Includes:
A 12v 12amp and 6v 12amp battery wired to 18 volts with 40 amp fuse and Power Wheels style connector
1 18 volt charger w/ Power Wheels style connector

Spade Connections or Soldered Connections:

Spade connections give you the flexibility of easily changing a single battery from your pack to replace a bad one or change to a different voltage.
Soldered connections give the strongest physical attachment and the best possible electrical connection for reducing amperage draw.


Make sure you have room in your battery compartment. Will fit in all 12V Wranglers, F-150, Hurricanes, C7 Corvettes, Porsche GT3's, Dune Racers, Stingers, as well as most Mustangs. Just unscrew the white battery retainer bracket and toss it aside.
Side-by-side the batteries measure combined:
Length: 5.95"
Width: 5.9"
Height 3.74"
End-to-end the batteries measure:
Length: 11.9"
Width: 3.96"
Height 3.74"

They can be put side-by-side, end-to-end, or standing on edge.

For Non-Power Wheels brand vehicles you'll need to change your vehicle's connector to the 12v Male Connector linked on this page.

Batteries can not be sent 3rd, 2nd or Next Day Air for hazmat purposes. Orders placed as such will be switched to Priority Mail.

Our Price: $130.00
Sale Price: $112.99
Savings: $17.01
24 Volt Conversion for 12 Volt Power Wheels w/ charger 24 Volt Conversion for 12 Volt Power Wheels w/ charger

This kit converts any 12v grey battery Power Wheels to 24 volts and allows you to go back to 12 volts whenever you want. It also increases run time 33% over the stock battery. Includes a 24 volt charger that will recharge the batteries in 6 hours. Indicator light to let you know when batteries are charged and conditioner so you don't ruin the batteries over the winter.

Kit Includes:
2 of our 12v 12amp batteries wired to 24 volts with 40 amp fuse and Power Wheels style connector
1 24 volt charger-conditioner w/ Power Wheels style connector

Make sure you have room in your battery compartment. Will definitely fit in all F-150's and Hurricanes as well as most Mustangs and
12V Wranglers. Just unscrew the white battery retainer bracket and toss it aside. New Corvette owners can relocate batteries under the seat.

Spade Connections or Soldered Connections:
Spade connections give you the flexibility of easily changing a single battery from your pack to replace a bad one or change to a different voltage.
Soldered connections give the strongest physical attachment and the best possible electrical connection for reducing amperage draw.

Each battery is:
Length: 5.95"
Width: 3.96"
Height 3.74"
They can be put side-by-side, end-to-end, or standing on edge.
If your battery compartment doesn't have this much room consider using our 24 Volt Dune Racer Conversion Kit instead which separates the 2 batteries into 2 different compartments.

For vehicles not made by Power Wheels you'll need to change your car's battery connector to the one linked on this page (sold separately).

Batteries can not be sent 3rd, 2nd or Next Day Air for hazmat purposes. Orders placed as such will be switched to Priority Mail.

Our Price: $145.00
Sale Price: $126.99
Savings: $18.01
Stage II Speed Motors/Gearboxes for F-150 Stage II Speed Motors/Gearboxes for F-150

This is the Stage II Motor/Gearbox kit for all Powerwheels Ford F150's and Raptors that are two-seaters. The Stage II kit includes Lightened Hardened Steel First Gears with Ball Bearings for added gearbox durability. Heat Sinks are added to our Performance 550 motors to help handle additional heat loads created by 18 volts use. These gearboxes have been built using our Race Grease to reduce friction and motor temps. At 18 volts this kits has a higher top end then the Stage III or IV kits but not as much off-road power or long term durability. Kit includes:

- 2 Modified 550 motors pre-installed in gearboxes.
* Torque sleeves on both motors.
* Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!
- Heat sinks added to both motors for cooler temps and longer run times.
- Hardened Steel First Gears running on 2 ball bearings each.
- Hardened Steel Pinion Gears.
- Race Grease for even more top speed.
- Gearboxes are the newest 7R high strength design.
- Cap nut to re-assemble vehicle (if required on your model).
- Installation and Break-in Instructions.

Motors are safe for up to 18 volts. We strongly recommend using Metal First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Our Price: $210.00
Sale Price: $185.00
Savings: $25.00
Stage IV TORQUE Motors/Gearboxes for F-150 Stage IV TORQUE Motors/Gearboxes for F-150

This is the Stage IV Motor/Gearbox kit for 2-seater F-150's including the Ford Raptor. The Stage IV Torque kit is specifically designed for vehicles running at 18 or 24 volts and is re-geared for maximum torque as oppose to the Stage IV Speed kit which is designed for top speed. It is ideally suited for smash-up-derby's, mud bogs, overweight vehicles, and tough tough terrain The Massive 775 motors provide insane amounts of torque for off-road and handle 24 volt loads without a care. The weakest link in the gearbox, the First Gear, has been replaced with a hardened steel first gear which also has 2 ball bearings for maximum efficiency. The thicker-then-molasses stock grease has been replaced with our Teflon Race Grease designed to coat the gears and shafts to make them more slippery and create less heat buildup. The gearbox housings and remaining gears are the newest, most durable design that Mattel has designed. Installation is simply removing your old gearboxes and putting your Stage IV in its place. Kit includes:

- 2 massive 775 size Modified Motors with Internal Cooling Fans pre-installed in gearboxes.
- Torque sleeves on both motors.
- Spade Connectors for easy wire installation.
- 2 Hardened Steel Pinion Gears with Lifetime Warranty*.
- 2 Hardened Steel First Gears with Lifetime Warranty*.
- 4 Steel Ball Bearings.
- Modified Final Gear Ratio for the most power to keep your wheels moving.
- MLToys Teflon Race Grease for even more speed, motor durability, and more run time.
- Gearboxes and nylon gears are the newest 7R high strength design*.
- One cap nut for re-assembly (if required on your vehicle model).

Motors are safe for up to 24 volts. We strongly recommend using Steel First Gears when running 18 volts or more.

* For warranty details on gears and gearbox housings please see our Warranty page. Just like when modifying a real car, modifying a Power Wheels voids all warranties. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Our Price: $265.00
Sale Price: $230.00
Savings: $35.00
Stage IV Speed Motors/Gearboxes for F-150 Stage IV Speed Motors/Gearboxes for F-150

The Stage IV kit is specifically designed for vehicles running at 18 or 24 volts The Massive 775 motors provide insane amounts of torque for off-road and handle 24 volt loads without a care. The weakest link in the gearbox, the First Gear, has been replaced with a hardened steel first gear which also has 2 ball bearings for maximum efficiency. The thicker-then-molasses stock grease has been replaced with our Teflon Race Grease designed to coat the gears and shafts to make them more slippery and create less heat buildup. The gearbox housings and remaining gears are the newest, most durable design that Mattel has designed. This setup is for die-hard speed addicts only. Installation is simply removing your old gearboxes and putting your Stage IV in its place. Kit includes:

- 2 massive 775 size Modified Motors with Internal Cooling Fans pre-installed in gearboxes.
- Torque sleeves on both motors.
- Spade Connectors for easy wire installation.
- 2 Hardened Steel Pinion Gears with Lifetime Warranty*.
- 2 Hardened Steel First Gears with Lifetime Warranty*.
- 4 Steel Ball Bearings.
- Modified Final Gear Ratio for even more top speed.
- MLToys Teflon Race Grease for even more speed, motor durability, and more run time.
- Gearboxes and nylon gears are the newest 7R high strength design*.
- One cap nut for re-assembly (if required on your vehicle model).

Motors are safe for up to 24 volts. We strongly recommend using Steel First Gears when running 18 volts or more.

* For warranty details on gears and gearbox housings please see our Warranty page. Just like when modifying a real car, modifying a Power Wheels voids all warranties. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Our Price: $265.00
Sale Price: $230.00
Savings: $35.00
Stage V Super Speed Motors/Gearboxes for F-150 Stage V Super Speed Motors/Gearboxes for F-150

The Stage V kit is specifically designed for 2-person F-150's, F-150 Extremes, and F-150 Raptors running at 18 or 24 volts The Massive 775 motors provide insane amounts of torque for off-road and handle 24 volt loads without a care. The weakest link in the gearbox, the 72 Tooth First Gear, has been replaced with our 66 Tooth Hardened Steel First Gear spinning on 2 ball bearings for maximum efficiency. The 17 tooth pinion has been replaced with a 22 Tooth Hardened Steel Pinion. Our new gear ratio makes a significant speed gain over the Stage IV kits AND reduces wheel spin! The thicker-then-molasses stock grease has been replaced with our Teflon Race Grease designed to coat the gears and shafts to make them more slippery and create less heat buildup. The gearbox housings and remaining gears are the newest, most durable design that Mattel has designed. This setup is for die-hard speed addicts only. Installation is simply removing your old gearboxes and putting your Stage IV in its place. Kit includes:

- 2 massive 775 size Modified Motors with Internal Cooling Fans pre-installed in gearboxes.
- Torque sleeves on both motors.
- Spade Connectors for easy wire installation.
- 2 Hardened 22 Tooth Steel Pinion Gears with Lifetime Warranty*.
- 2 Hardened 66 Tooth Steel First Gears with Lifetime Warranty*.
- 4 Steel Ball Bearings.
- Modified Final Gear Ratio for even more top speed.
- MLToys Teflon Race Grease for even more speed, motor durability, and more run time.
- Gearboxes and nylon gears are the newest 7R high strength design*.
- One cap nut for re-assembly (if required on your vehicle model).
- Written and video instructions.

Motors are safe for up to 24 volts. We strongly recommend using Steel First Gears when running 18 volts or more.

* For warranty details on gears and gearbox housings please see our Warranty page. Just like when modifying a real car, modifying a Power Wheels voids all warranties. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!

Our Price: $280.00
Sale Price: $250.00
Savings: $30.00