Home > Motors & Gearings > Motor / Gearing Tuned Systems > Peg Perego Ground Force Tuned Kits >

Stage III Speed Motors for Peg Perego Ground Force
Stage III Speed Motors for Peg Perego Ground Force


 
Alternative Views:


: $148.00
: $108.00
Savings: $40.00

Product Code: STAGE-III-GROUND-FORCE


Installation Aids:

Lubrication Options



Qty:  
Description
 
This is the Stage III Performance Motor kit for Peg Perego Gound Force tractors with WHITE gearboxes. The Stage III motors give the tractor 4x more pulling power plus will increase speed as you increase voltage up to 24v. Kit includes:
- 2 Modified Performance 775 motors - The fastest 775 motors designed for ride-ons today
- 10 tooth Hardened Steel pinion gears
- Torque sleeves on both motors for more low end power.
- Internal cooling fans in the motors
- Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!
- Bendable motor wire tabs so as not to break as easy as stock ones.
- 550 to 775 Universal Motor Mount Kit

To install this kit you will need to trim the plastic ring off of the gearbox housing that encompasses the stock motor. Very easy to do.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Required for assembly: threadlock to secure the pinion gears and motor mount screws to the motors. 1.5mm Allen Key to secure pinion gears.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Peg Perego Ground Force at 24 volts

Recommended Accessories
.437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash Four Point Safety Harness Axle Thrust Bearing
: $1.50

Add
: $10.00

Add
: $19.99

Add
: $1.60

Add
.437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash Four Point Safety Harness Axle Thrust Bearing
Cap Nut Tool Brake Reduction Module
: $1.00

Add
: $11.00

Add
Cap Nut Tool Brake Reduction Module

Share your knowledge of this product. Be the first to write a review »