Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Corvette, Porsche GT3, Mustang & McQueen Tuned Kits >

Stage III DIY Motors for C7 Corvette, Mustang, & Porsche GT3
Stage III DIY Motors for C7 Corvette, Mustang, & Porsche GT3


 
Alternative Views:


: $125.00
: $100.00
Savings: $25.00


Product Code: STAGE-III-DIY-CORVETTE


Heatsinks?:


Installation Aids:

Lubrication Options



Pinion Gear Teeth*:


Qty:  
Description
 
This is the Stage III Motor kit for all new Power Wheels Mustangs Porsche GT3's and C7 Corvettes/McQueens that started life as 12v. The Stage III kit is specifically designed for vehicles running at 18 or 24 volts. These motors provide 4x more off-road torque then stock motors and won't burn up even at 24v. Kit includes:

- 2 massive 775 size Modified motors with internal cooling fans
- Hardened Steel Pinion Gears attached to motors
- Torque sleeves on both motor for even more low end powers
- Quick change wire connectors with no soldering installation
- Aluminum Vented Motor Mounts to keep the motors from twisting on the gearcases.
- 4mm motor mounting screws

Please pick a pinion gear size to match the size attached to your stock motor. (Stock pinions are not re-usable)


Motors are safe for up to 24 volts. We strongly recommend using Metal First Gears when running 18 volts or more. Not for use with lithium batteries unless you use our Soft Start Low Voltage Lithium Module.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage III Porsche
See the Stage III System highlighted on 1320Video!!
How and Why to Break-in Motors
How to Properly Apply Grease

Recommended Accessories
Axle Thrust Bearing 24 Volt Conversion for 12 Volt Power Wheels w/ charger .437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash
: $1.70

Add
: $152.00

Add
: $1.60

Add
: $10.00

Add
Axle Thrust Bearing 24 Volt Conversion for 12 Volt Power Wheels w/ charger .437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash
Brake Reduction Module Cap Nut Tool Four Point Safety Harness
: $11.00

Add
: $1.00

Add
: $19.99

Add
Brake Reduction Module Cap Nut Tool Four Point Safety Harness

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 well built motors and gearboxes! November 24, 2020
Reviewer: Alex Lineberger from Denver, NC United States  
great product and fast shipping!!  make sure you do the break-in period!!
My niece couldn't be happier!!!

Was this review helpful to you?