Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Escalade & PW Gravedigger >

Stage II Motors & Gearboxes for Escalade
Stage II Motors & Gearboxes for Escalade


 
Alternative Views:


: $235.00
: $205.00
Savings: $30.00


Product Code: STAGE-II-PHOENIX-ESCALADE


Installation Aids:

Heat Sink Option



Qty:  
Description
 
This is the Stage II Performance Motor/Gear kit for all Powerwheels Escalades with 7R gearboxes. Will also work on older Jeep Wranglers with 14" Wheels and Power Wheels brand Grave Diggers. It has the fastest 550 motors combined with the most durable gears. Easy to install... we've never had a customer that couldn't complete it! Kit includes:
- 2 Modified motors. The fastest 550's made for ride-ons anywhere.
- Motors have Internal Cooling Fans
- Torque sleeves on both motors for more low end power.
- Quick change motor connectors. Makes motors/gearboxes easy to take in and out of vehicle.
- Bendable motor wire tabs so as not to break as easy as stock ones.
- Hardened Steel First Gears running on 2 ball bearings each.
- Hardened Steel Pinion Gears.
- Race Grease for even more top speed.
- 2 MLToys Phoenix Gearboxes. The First Gearboxes ever designed specifically for high speed ride-on use!
- Fully assembled! Just swap out with your stock motor/gearboxes and follow the break-in instructions!
- Written and Video Installation and Break-in Instructions.

Motors are warrantied for up to 12 volts of SLA batteries and are often used with 18 volts (not warrantied). It is HIGHLY RECOMMENDED to add the 550 Cooling Fan Kit if you do run 18 volts. Still helpful for 12 volt vehicles too. If you're running lithium batteries you will need to use the Soft Start Low Voltage Lithium Module. We strongly recommend using our Metal First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Gravedigger on 18v and Stage II Motor/Gearboxes
Phoenix Performance Gearboxes
How to Install Staged Motor Gearboxes
How and Why to Break-in Motors

Recommended Accessories
Brake Reduction Module 550 Cooling Fan Kit Four Point Safety Harness Cap Nut Tool
: $11.00

Add
: $28.00

Add
: $19.99

Add
: $1.00

Add
Brake Reduction Module 550 Cooling Fan Kit Four Point Safety Harness Cap Nut Tool
Dual Motor Temperature Gauge In-Dash Axle Thrust Bearing .437" Reusable Wheel Collar
: $10.00

Add
: $1.70

Add
: $1.60

Add
Dual Motor Temperature Gauge In-Dash Axle Thrust Bearing .437" Reusable Wheel Collar

Share your knowledge of this product. Be the first to write a review »