Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Dune Racer, Baja Extreme, Trailster & Stinger Tuned Kits >

Stage II Motors & Gearboxes for Dune Racer
Stage II Motors & Gearboxes for Dune Racers

: $235.00
: $205.00
Savings: $30.00


Heat Sink Option

This is the Stage II Performance Motor-Gearbox kit for all Powerwheels for Dune Racer & Baja Extreme, Trailster, & Stingers. It has the fastest 550 motors combined with the most durable gears. Easy to install... we've never had a customer that couldn't complete it! Kit includes:
- 2 Modified motors. The fastest 550's made for ride-ons anywhere.
- Motors have Internal Cooling Fans
- Torque sleeves on both motors for more low end power.
- Quick change motor connectors. Makes motors/gearboxes easy to take in and out of vehicle.
- Bendable motor wire tabs so as not to break as easy as stock ones.
- Hardened Steel First Gears running on 2 ball bearings each.
- Hardened Steel Pinion Gears.
- Race Grease for even more top speed.
- 2 MLToys Phoenix Gearboxes. The First Gearboxes ever designed specifically for high speed ride-on use!
- Fully assembled! Just swap out with your stock motor/gearboxes and follow the break-in instructions!
- Written and Video Installation and Break-in Instructions.

Motors are warrantied for up to 12 volts of SLA batteries and are often used with 18 volts of SLA batteries (not wrrantied). It is HIGHLY RECOMMENDED to add the Heat Sinks option if you do run 18 volts. Still helpful for 12 volt vehicles too. We strongly recommend using our Metal First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage II at 18 volts
Phoenix Performance Gearboxes
How to Install Staged Motor Gearboxes
How and Why to Break-in Motors

Recommended Accessories
Axle Thrust Bearing Dual Motor Temperature Gauge In-Dash .437" Reusable Wheel Collar Four Point Safety Harness
: $1.60

: $10.00

: $1.50

: $19.99

Axle Thrust Bearing Dual Motor Temperature Gauge In-Dash .437" Reusable Wheel Collar Four Point Safety Harness
Brake Reduction Module Cap Nut Tool
: $11.00

: $1.00

Brake Reduction Module Cap Nut Tool

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Vroom !! January 25, 2022
Reviewer: Floyd Campbell from Glen Gardner, NJ United States  
These are definitely a step up from the stock motors and gear boxes. Thanks for the recommendations, I will be back for more stuff!

Was this review helpful to you?