Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Corvette, Porsche GT3, Mustang & McQueen Tuned Kits >

Stage II DIY Motors/Gears for C7 Corvette, Mustang, & Porsche GT3
Stage II DIY Motors/Gears for C7 Corvette, Mustang, & Porsche GT3


 
: $155.00
: $138.00
Savings: $17.00

Product Code: STAGE-II-DIY-MUSTANG


Installation Aids:


Pinion Gear Teeth*:

Heat Sink Option



Qty:  
Description
 
This is the Stage II Performance Motors kit for Power Wheels Porsche GT3's, Mustangs and C7 Corvettes and McQueens that started as 12v. It has the fastest 550 motors combined with the most durable gears. Easy to install... we've never had a customer that couldn't complete it! Kit includes:
- 2 Modified motors. The fastest 550's made for ride-ons anywhere.
- Motors have Internal Cooling Fans
- Torque sleeves on both motors for more low end power.
- Quick change motor connectors. Makes motors/gearboxes easy to take in and out of vehicle.
- Bendable motor wire tabs so as not to break as easy as stock ones.
- Hardened Steel First Gears running on 2 ball bearings each.
- Hardened Steel Pinion Gears.
- Race Grease for even more top speed.
- Written and Video Installation and Break-in Instructions.

Motors are warrantied for up to 12 volts of SLA batteries and are often used with 18 volts (not warrantied). It is HIGHLY RECOMMENDED to add the 550 Cooling Fan Kit if you do run 18 volts. Still helpful for 12 volt vehicles too. If you're running lithium batteries you will need to use the Soft Start Low Voltage Lithium Module. We strongly recommend using our Metal First Gears when running 18 volts or more.

Please pick a pinion gear size to match the size attached to your stock motor. (Stock pinions are not re-usable)


Required for assembly: Phillips and Standard Screwdriver, wire cutters/strippers, 120-150 grit sand paper, power drill, cookies.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage II at 18 volts
How to Install Hardened Steel First Gears
How to Install Staged Motor Gearboxes
How and Why to Break-in Motors

Recommended Accessories
Four Point Safety Harness Axle Thrust Bearing Cap Nut Tool 550 Cooling Fan Kit
: $19.99

Add
: $1.70

Add
: $1.00

Add
: $28.00

Add
Four Point Safety Harness Axle Thrust Bearing Cap Nut Tool 550 Cooling Fan Kit
.437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash Brake Reduction Module 18 Volt Conversion for 12 Volt Power Wheels w/ charger
: $1.60

Add
: $10.00

Add
: $11.00

Add
: $132.00

Add
.437" Reusable Wheel Collar Dual Motor Temperature Gauge In-Dash Brake Reduction Module 18 Volt Conversion for 12 Volt Power Wheels w/ charger

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great up grade to little ones car January 6, 2022
Reviewer: Michael Addington from Gordonsville, VA United States  
This is a great upgrade to my little ones car that she got for Christmas. We are still only running 12v but it gave the little speed demon what she needed with room to go faster. My daughter let me know her 12 year old truck she got from her cousin is to slow for her. This spring we will have to do a 24v conversation. With some tlc.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 August 26, 2020
Reviewer: Trent Musser from VALLEJO, CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Purchase December 22, 2019
Reviewer: Richard Mudge from Wilmington, NC United States  
Easy to install, great instructions and my kids love being the fastest in the neighborhood.

Was this review helpful to you?