Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Escalade & PW Gravedigger >

Stage I Motors & Gearboxes for Escalade
Stage I Motors & Gearboxes for Escalade


 
Alternative Views:


: $150.00
: $130.00
Savings: $20.00


Product Code: STAGE-I-PHOENIX-ESCALADE


Installation Aids:

Heat Sink Option



Qty:  
Description
 
This is the Stage I Performance Motors kit for all Powerwheels Escalades. Will also work on older Power Wheels brand Grave Diggers. Not for the 24v Monster Jam Grave Digger.The Stage I kit is a great way to add more speed without breaking the bank. Kit includes:
- 2 Modified Performance 550 motors - The fastest 550 motors designed for ride-ons today
- 2 Lightweight metal pinion gears
- Torque sleeves on both motors for more low end power.
- Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!
- Bendable motor wire tabs so as not to break as easy as stock ones.
- 2 MLToys Phoenix Gearboxes, the first gearboxes ever designed from the ground up for higher speed ride-on use!
- Fully assembled. Just swap out with your stock motor/gearboxes and follow the break-in instructions!

Motors are warrantied for up to 12 volts of SLA batteries and are often used with 18 volts (not warrantied). It is HIGHLY RECOMMENDED to add the 550 Cooling Fan Kit if you do run 18 volts. Still helpful for 12 volt vehicles too. If you're running lithium batteries you will need to use the Soft Start Low Voltage Lithium Module. We strongly recommend using our Metal First Gears when running 18 volts or more.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage I in 12v Mustang
How and Why to Break-in Motors
Phoenix Performance Gearboxes
How to Install Staged Motor Gearboxes

Recommended Accessories
Dual Motor Temperature Gauge In-Dash Brake Reduction Module Cap Nut Tool 550 Cooling Fan Kit
: $10.00

Add
: $11.00

Add
: $1.00

Add
: $28.00

Add
Dual Motor Temperature Gauge In-Dash Brake Reduction Module Cap Nut Tool 550 Cooling Fan Kit
Axle Thrust Bearing .437" Reusable Wheel Collar Four Point Safety Harness
: $1.70

Add
: $1.60

Add
: $19.99

Add
Axle Thrust Bearing .437" Reusable Wheel Collar Four Point Safety Harness

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 April 19, 2022
Reviewer: John from VA  


Was this review helpful to you?