Home > Motors & Gearings > Individual Performance Gears >

Stage V 66T Steel First Gear & 22T Pinion w/ 2 Steel Ball Bearings
Power Wheels Stage V Hardened Steel First Gearr with Ball Bearings


 
Our Price: $50.00

Product Code: 66T-22T

Lubrication Options



Qty:  
Description
 
This gear combination is for the hard core top speed addict only. It will only fit in 7R Gearboxes that stock used a 15, 16, or 17 tooth pinion gear and with 775 motors. This combination changes the final drive ratio to the highest possible top speed of any ride-on today. It is for on-road use only with no passengers in the car or there may not be enough low-end power (leading to fuse blowing).

The First Gear is the weakest link in a Power Wheels 7R Gearcase. This is the solution. We designed this gear with a leading American gear manufacturing company to be so strong we offer a Lifetime Warranty* on it. The gear is made from one solid piece of stock, heat treated, and has holes to cut weight. The steel ball bearings reduce friction, heat, and resistance making for the most efficient gear possible.

To install this gear you will have to sand the black finish off of the shaft that it spins on. Do not sand the black finish off of the portion of the shaft that installs into the gearbox housing. Clean the grease off the first gear shaft, then mark the base of the first gear shaft. Pull it out and put the portion of the shaft that was stuck in the gearbox into a drill. Spin the shaft on 120ish sandpaper, stopping every few seconds to test fit a bearing. The bearing must slide smoothly all the way to the mark you made.

When using 775 motors you must use the 775 To 7R Mounting Kit linked on this page.
Will NOT work with stock Power Wheels motors... it will tear up their pinion gears.

If you are replacing a stripped nylon first gear you will need to replace the grease too as it is contaminated with plastic fragments.

This is enough for ONE gearbox. If your vehicle has 2 gearboxes you'll need to order 2 of these.

*See our Warranty page for details.
Stage V Motors/Gears and 24v Conversion Kit
Stage V Motors/Gears and 24v Conversion Kit
How to Install Hardened Steel First Gears

Recommended Accessories
775 to 7R Motor Mounting Kit (2 motors) High Speed Race Grease 775 Hardened Steel 5mm Pinion Gear 550 3mm Pinion Gear
Our Price: $13.00
Our Price: $5.00
Our Price: $12.50
775 to 7R Motor Mounting Kit (2 motors) High Speed Race Grease MLToys 775 Motor Pinion Gears MLToys 550 Motor Pinion Gears
.437" Reusable Wheel Collar
Our Price: $1.50
.437" Reusable Wheel Collar

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 Great product June 19, 2021
Reviewer: Cory Groux from Great Falls, MT United States  
But does your 23 tooth pinion gear work with you 66 tooth first…..if so does 23 gears make it a little faster…..thanks

Was this review helpful to you?