Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Dune Racer, Baja Extreme, Trailster & Stinger Tuned Kits >

Stage I DIY Motors/Gears for Dune Racer & Baja Extreme
MLToys Stage I Speed Motors for Dune Racers


 
: $85.00
: $68.00
Savings: $17.00

Product Code: STAGE-I-DIY-DUNE-RACER-17T


Installation Aids:

Lubrication Options


Heat Sink Option



Qty:  
Description
 
This is the Stage I Motors kit for all Powerwheels 12v Dune Racers, Baja Extremes, Trailsters, & Stingers. The Stage I kit is a great way to add more torque and speed to these cars without breaking the bank. It is also the most power you can add without increasing the voltage. Kit includes:

- 2 Modified Performance 550 motors - The fastest 550 motors designed for ride-ons today. Easily bolt right into your gearboxes with 2 screws.
- Lightweight metal pinion gears
* Torque sleeves on both motors.
* Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!
- Bendable motor wire tabs so as not to break as easy as stock ones.
- Modified Final Gear Ratio for even more speed

Motors are warrantied for up to 12 volts of SLA batteries and are often used with 18 volts (not warrantied). It is HIGHLY RECOMMENDED to add the 550 Cooling Fan Kit if you do run 18 volts. Still helpful for 12 volt vehicles too. If you're running lithium batteries you will need to use the Soft Start Low Voltage Lithium Module. We strongly recommend using our Metal First Gears when running 18 volts or more.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage I in 12v Mustang
Stage I Arctic Cat at 18 Volts
How and Why to Break-in Motors
How to Properly Apply Grease

Recommended Accessories
Dual Motor Temperature Gauge In-Dash Brake Reduction Module 550 Cooling Fan Kit Axle Thrust Bearing
: $10.00

Add
: $11.00

Add
: $28.00

Add
: $1.70

Add
Dual Motor Temperature Gauge In-Dash Brake Reduction Module 550 Cooling Fan Kit Axle Thrust Bearing
.437" Reusable Wheel Collar Four Point Safety Harness
: $1.60

Add
: $19.99

Add
.437" Reusable Wheel Collar Four Point Safety Harness

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 14 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 March 20, 2023
Reviewer: Derrick Keene from Ray City, GA United States  
Direct fit and works great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 October 18, 2022
Reviewer: Brad Defenbaugh from Sammamish, WA United States  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Motors worked great March 3, 2021
Reviewer: Rob from , CA United States  
Motors worked great. The heat syncs fell off first day but really weren’t needed as motors are fan cooled. But they did look cool.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Great January 6, 2021
Reviewer: Jonathan Benzer from EDMOND, OK United States  
These were simple to install.  The car runs better than ever.  It’s probably 25% faster than before.  Worth the money.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 October 22, 2020
Reviewer: brian williams from middleton, ID United States  


Was this review helpful to you?

View All Customer Reviews