Home > Motors & Gearings > Motor / Gearing Tuned Systems > Power Wheels Arctic Cat Tuned Kits >

Stage I DIY Motors for Arctic Cat
MLToys Stage I Arctic Cat


 
Alternative Views:


: $85.00
: $68.00
Savings: $17.00


Product Code: STAGE-I-DIY-ARCTIC-CAT


Installation Aids:

Lubrication Options


Heat Sink Option



Qty:  
Description
 
This is the Stage I Performance Motor kit for all Power Wheels Artic Cats. The Stage I kit is a great way to add more speed to an Arctic Cat without breaking the bank. Kit includes:
- 2 Modified Performance 550 motors - The fastest 550 motors designed for ride-ons today
- Lightweight metal pinion gears
- Torque sleeves on both motors for more low end power.
- Quick-change wire connectors that require no soldering to install and allow fast install/removal of gearcases!
- Bendable motor wire tabs so as not to break as easy as stock ones.

Motors are warrantied for up to 12 volts of SLA batteries and are often used with 18 volts (not warrantied). It is HIGHLY RECOMMENDED to add the 550 Cooling Fan Kit if you do run 18 volts. Still helpful for 12 volt vehicles too. If you're running lithium batteries you will need to use the Soft Start Low Voltage Lithium Module. We strongly recommend using our Metal First Gears when running 18 volts or more.

While you've got the gearboxes out we recommend switching to our Race Grease which reduces resistance in the gearboxes. This allows more top speed and cooler running motors.

Just like when modifying a real car, modifying a Power Wheels voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage I Arctic Cat at 18 Volts
How and Why to Break-in Motors
How to Properly Apply Grease

Recommended Accessories
Brake Reduction Module 550 Cooling Fan Kit Cap Nut Tool Dual Motor Temperature Gauge In-Dash
: $11.00

Add
: $28.00

Add
: $1.00

Add
: $10.00

Add
Brake Reduction Module 550 Cooling Fan Kit Cap Nut Tool Dual Motor Temperature Gauge In-Dash
Four Point Safety Harness Axle Thrust Bearing .437" Reusable Wheel Collar
: $19.99

Add
: $1.70

Add
: $1.60

Add
Four Point Safety Harness Axle Thrust Bearing .437" Reusable Wheel Collar

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Top Notch Customer Service and product! September 8, 2017
Reviewer: Jeff Sickles from Milltown, NJ United States  
Bought Motor/Gear kit for my sons PW, installed and had small issue (mistake by me) and contacted via email about issues. Had fast responses and figures out issue right away (if I had only followed directions wouldn't of even been a problem, but the customer services was top notch. Will def purchase other accessories again in near future!

Was this review helpful to you?