Home > Motors & Gearings > Motor / Gearing Tuned Systems > Hunter 12v Monster Jam Grave Digger Tuned Kits >

Stage I Hunter Grave Digger Motors
Stage I Hunter Grave Digger Motors


 
: $85.00
: $68.00
Savings: $17.00

Product Code: STAGE-I-HUNTER-GRAVE-DIG-16T


Installation Aids:

Heat Sink Option



Qty:  
Description
 
This is a matched pair of 550 High Performance motors for the Hunter Products 12v Monster Jam Grave Digger. Not for Bravo or Power Wheels brand. Just unbolt your old motor and bolt in the new one. These motors will add significant speed and torque over stock motors. With each pair you get:
* Torque Sleeves around each motor to add more low-end power.
* Built-in Cooling Fans.
* Quick change wire connectors. Makes motors/gearboxes easy to take in and out of vehicle.
* Lightweight metal pinion gears installed on the motors with threadlock.
* Bendable motor wire tabs so as not to break as easy as stock ones.

If you want your motors to have a long happy life, a set of heat sinks will help keep your motors cool and fast! Our Heat Sinks fit over the torque sleeve and wrap 3/4 of the motor in heat dissipating aluminum fins.

Just like when modifying a real car, modifying a ride-on voids all warranties. If you have made any non-MLToys modifications to your car you should reach out to our tech support first to check compatibility. MLToys bears no responsibility for damage to vehicle, persons, or property incurred by modifying a vehicle. Be Smart, Be Safe, and Have Fun!
Stage I Arctic Cat at 18 Volts

Recommended Accessories
Axle Thrust Bearing Brake Reduction Module Four Point Safety Harness Volt / Fuel Gauge In-Dash
: $1.70

Add
: $11.00

Add
: $19.99

Add
: $9.00

Add
Axle Thrust Bearing Brake Reduction Module Four Point Safety Harness Volt / Fuel Gauge In-Dash
550 Cooling Fan Kit
: $28.00

Add
550 Cooling Fan Kit

Share your knowledge of this product. Be the first to write a review »