Home > Motors & Gearings > Motor Upgrades >

550 to 775 Universal Motor Mount
550 to 775 Universal Motor Mount

Alternative Views:

Our Price: $24.00


Installation Aids:

This mount is designed to fit our 775 motors to gearboxes that came with 550 motors. If you have a Power Wheels 7R Gearbox use the 775 to 7R Motor Mounts instead. If you have Kid Trax gearboxes with 19T pinions you do not need this kit as 775 motors bolt directly to them.
Your gearbox must have a flat surface large enough for the 775 motor to bolt to (42mm diameter). You will also need a pinion gear with a 5mm shaft hole and the same tooth count, pitch, and mod as your stock motor had. Here is the 5mm pinions 32 pitch .8mod that we offer: https://www.mltoys.com/product-p/775-pinion.htm

To install:
1. Use the screws provided (blue thread-lock recommended) to bolt our 775 motors to the mount.
2. Mount your pinion gear at the depth that will allow the teeth to mesh with the first gear in the gearbox (blue thread-lock recommended).
3. Use your original motor mount screws to secure the motor mount to the gearbox (blue thread-lock recommended).

Kit comes with 2 mounts and 4 mounting screws that go from the mounts to the motors.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 April 14, 2021
Reviewer: kevin norwood from Moncks corner, SC United States  

Was this review helpful to you?